RC4WD 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader w/Whiteab C

       Specifications:

• CNC Machined Metal parts
• Molded Steel bucket
• 6 channel 2.4Ghz radio
• Optimized Steel Hydraulic system
• Scale operator station (can fit a driving figure)
• Massive 29.5-25L-5 Tires
• Reliable hydraulic valve and adjustable pump
• Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
• Powder coated in yellow
• Brushless system (hydraulic)
• 40A brushless ESC with BEC
• Kv brushless monster torque Motor
• Realistic non functional disk break
• Scale ABS plastic interior
• Wheel with planetary gearbox build-in
• 2 speed full metal transmission (1:16 and 1:4 gear ratio)
• Realistic full metal Axles
• Run time is: 30 minutes (6500mAh Battery)
• Steel Machined oil pump (45mm X 30mm X 15.5mm)
• Maximum bucket force: 70kg / 154pounds
• Scale: 1 : 14
• Length: 741mm / 29inch
• Width: 276mm / 11inch
• Height: 276mm / 11inch
• Maximum bucket Height: 461mm / 18inch
• Maximum bucket up and down angle: 46 to 64 degrees
• Maximum bucket left and right angle: 38 degrees
• Wheel base: 284mm
• Dead Weight: 20.5kg / 45lbs
• Total mass load: 32kg / 70lbs
• Operating oil pressure: 20Bar, 290psi
• Manufactured by JDCustoms
• 
  
• What's Included:
  • 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (Yellow and White)
  
  
  Required Parts:
• Lipo Charger

• Hydraulic Connector M5 x 4mm Tube (90deg) (VVV-S0069)
• Pressure Relief Valve for Earth Digger (VVV-S0041)
• Mini Hydraulic Oil Pump with Brushless 40A Motor/ESC (VVV-S0090)
• 2mm Heavy Duty Hydraulic Tubing (VVV-S0073)
• Mega Truck Universal Shaft "Ver 2" (92mm to 130mm) (VVV-S0054)
• Heavy Equipment Mini Valve Servos (VVV-S0162)
• 1/14 Loader LED Lighting System (VVV-S0161)
  

• Semi Truck Sound Unit (VVV-S0074)
• Earth Mover 870K Warning Light System (VVV-S0189)
• Scale Heavy Duty Flat Bed Transporter
• High Intensity LED
• Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)
• Quick Connect Pallet Fork Attachment for 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (VVV-S0248)
• Universal Scale Functional Radiator for Hydraulic Equipment (VVV-S0246)
  

• For Detailed Setup. Click here

• While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
• ESC Supports bullet Connector
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Steps marked with an asterisk (*) require thread lock.
• Use thread lock sparingly.
• Do not over tighten screws otherwise you may strip the thread.