Κατηγορίες
Καλάθι
Λογαριασμός
Αναζήτηση
Πρόσφατες Προβολές
Όλες Οι Κατηγορίες
×
- CRAWLER
- Crawler - Αξεσουάρ
- DASH
- Lexan
- Καλώδια & Βύσματα
- ΠΡΟΣΦΟΡΕΣ
- Αυτοκίνητα
- Αεροπλάνα
- Ελικόπτερα
- Σκάφη - Πλοία
- Κινητήρες Nitro
- Καύσιμα
- Μπουζόπιπες - Μπουζιά
- Σέρβο
- Μίζες - Μιζόκουτα
- Θερμόμετρα
- Τηλεκατευθύνσεις
- Ανταλλακτικά
- Σιλικόνες - Λάδια - Καθαριστικά
- Drones - Multirotors
- Εργαλεία
- Speed Controls (ESC)
- Μπαταρίες
- Φορτιστές
- Ηλεκτρικά Μοτέρ
- Κόλλες - Χρώματα - Spray
- Μπλούζες - Καπέλα - Διαφημιστικά
- Εργαλειοθήκες - Βάσεις - Τσάντες Μοντέλων
- Αυτοκόλλητα
Καλάθι Αγορών
×
Το καλάθι είναι άδειο!
Ο Λογαριασμός Μου
×
Αναζήτηση
×
Πρόσφατες Προβολές
×
RC4WD 1/14 Scale R350 Compact Track Loader RTR
3.260,00€
Specifications:
- CNC Machined Metal Parts
- Molded Steel Bucket
- 6 Channel 2.4Ghz Radio
- Optimized Steel Hydraulic System
- Scale Operator Station (can fit a driving figure)
- Crawler Travel System
- Heavy Duty Hoses
- Powder-coated in White, Grey and Red
- Brushless System (Hydraulic)
- Scale Interior
- Transmission Ratio: 1:109
- Battery Size:90 x 45 x 20mm / 3.54 x 1.77 x 0.78in
- Bucket Capacity: 155 x 65 x 42mm / 6.10 x 2.55 x1.65in
- Maximum Bucket Force: 1.5kg / 6.83lbs
- Scale: 1 : 14
- Length: 284mm / 11.1in
- Width: 156mm / 6.14in
- Height: 157mm / 6.18in
- Maximum Bucket Height: 235mm / 9.25in
- Maximum Bucket up and down Angle: 11 to 103 degrees
- Weight: 3.1kg / 6.8lbs
- Operating Oil Pressure: 3Mpa
- Manufactured by JDCustoms
- What's Include:
- 1x 1/14 Scale R350 Compact Track Loader RTR
Required Parts: - 2S Lipo Battery
- 4x AA Batteries for Radio (Z-S1718)
- Gens ace 5000mAh 7.4V 50C 2S1P Short-Size Lipo Battery Pack with T Style Plug
Optional Parts:
- 1/14 Grapple for R350 Compact Track Loader (VVV-S0242)
- 1/14 Pallet Forks for R350 Compact Track Loader (VVV-S0247)
Instruction Manual:
Notes:
- While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
- ESC Supports bullet Connector
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.