- CRAWLER
- Crawler - Αξεσουάρ
- DASH
- Lexan
- Καλώδια & Βύσματα
- ΠΡΟΣΦΟΡΕΣ
- Αυτοκίνητα
- Αεροπλάνα
- Ελικόπτερα
- Σκάφη - Πλοία
- Κινητήρες Nitro
- Καύσιμα
- Μπουζόπιπες - Μπουζιά
- Σέρβο
- Μίζες - Μιζόκουτα
- Θερμόμετρα
- Τηλεκατευθύνσεις
- Ανταλλακτικά
- Σιλικόνες - Λάδια - Καθαριστικά
- Drones - Multirotors
- Εργαλεία
- Speed Controls (ESC)
- Μπαταρίες
- Φορτιστές
- Ηλεκτρικά Μοτέρ
- Κόλλες - Χρώματα - Spray
- Μπλούζες - Καπέλα - Διαφημιστικά
- Εργαλειοθήκες - Βάσεις - Τσάντες Μοντέλων
- Αυτοκόλλητα
Το καλάθι είναι άδειο!
MUGEN R-Edition MBX-8R 1/8 4WD OFF-Road Buggy KIT
Suspension:
New suspension mounts and geometry. The MBX8R uses new narrow RF (C)
and RR (D) pivot blocks with new pivot inserts for increased
tuneability. New longer box-shaped suspension arms and arm stiffeners.
The rear arm uses an impact resistant material for increased
durability. Adjusting the hardness of the lower suspension arms is
possible with optional CFRP plates. The rear uprights are also new for
the MBX8R. The molded uprights have CFRP plates to adjust rear roll
center.
New front shock tower and upper front arm mount use new pivot inserts for increased tuneability.
Chassis:
The MBX8R chassis features a slightly new design to accommodate the new suspension geometry.
Clutch:
New 4 shoe clutch. The MBX8R comes with a complete new 4 shoe clutch
from Mugen Seiki. The new 4 shoe clutch was designed to be easy to work
on and more tunable. This clutch features a 34mm aluminum 4 shoe
flywheel with removable steel pins. The new clutch has a unique way of
adjusting spring tension to tune the engagement to suit your engine,
track conditions and personal preferences to optimize fuel consumption
and performance. Multiple clutch springs will be available as an option
parts. New vented 13T clutch bell will be included in the MBX8R kit.
The MBX8R will come with two aluminum and two carbon shoes in the kit.
Differential and drivetrain:
High Traction Differentials are included in the MBX8R. The Mugen Seiki
HTD provides increased acceleration, longer runtime, and more consistent
handling. The HTD’s also increase stability, traction and improve
handling in bumpy conditions. The HTD diffs use 20T internal gears to
improve consistency and to have smoother operating differentials.This
makes it easier to time rhythm sections, better in bumpy and low grip
conditions, helps to increase traction, and increases fuel mileage.The
MBX8R comes with 12T bevel gear and 42T conical gears and 46T spur gear
in the kit.
New wing and wing mount:
Lightweight high down-force wing allows more air to flow to improve jumping.
The new IFMAR legal wing is durable, lightweight, and very stable on the track and in the air.
- Revised rear wing mount will provide additional downforce and
increase durability.CFRP wing plate will be available as an option
part.
- New S bent air filter boot and high-volume filter housing.
- New brake override and caliper springs for smoother more consistent braking.
- New 90-degree fuel tank fitting for cleaner fuel line routing.
- New sway bar collars to reduce sway bar movement.
- Emulsion shock caps are included in the MBX8R kit and can choose between diaphragm or emulsion.
- New high-volume battery box and radio plate.
- New mount & receiver box to which various manufacturer’s electric switch can be attached.
- Alum. wing washer
- Rear upper arm link compatible with the new rear uprights.
- Harder and lighterweight F/R lower arms will be available as an option part.