Κατηγορίες Καλάθι Λογαριασμός Αναζήτηση Πρόσφατες Προβολές

MCD RR5-MAX PRO Spec (not RTR) 1/5

0 κριτικές / Γράψτε μια κριτική

1.499,99€

Κατασκευαστής MCD

Κωδικός Προϊόντος: 01341

Διαθεσιμότητα: Διαθέσιμο

Περιγραφή
Κριτικές (0)

The Extended Winner

The RR5 MAX, has improved handling and driving stability that come from the extended V5 chassis. The RR5 MAX is equipped with the extended fully aerodynamic body for an improved down force on the front and rear of the RR5-Max.

Top of the line racing off-road Buggy
Easy assembly/dis-assembly
Easy maintenance
Centralized and compacted parts layout on chassis
Elite racing design ultra-durable high performance parts
Fifth generation MCD chassis & suspension arms
Sophisticated full-time 4WD Shaft Driven mechanics
Ultra strengthened chrome drive shaft and axle
Easy gear mesh system
Easily removable one-piece electronics tray
CNC machined, anodized light-weight 7075 T6 aircraft alloy chassis
Strengthened long wishbones
Spare softer wishbones
Solid and durable side guards
Easily removable composite front, rear and center diff houses
Ultra durable front and rear adjustable brake system
Rear-brake only servo slot
8mm light-weight 7075 air craft alloy front and rear towers
Coil-over extended alloy shock absorbers with High Pressurized Cell™ System
Anodized alloy shock bodies
Ultra hardened steel transmission gears
No-Stress-Effect polyamide front bumper and rear diffuser
Ultra durable steel ball cup-joints
CNC machined anodized alloy engine carrier
Double ball bearing anti-roll bars
Planetary differentials
Super-Cooling V5 air ventilation system
Viper Racing Air Filters with dual layer foam and thermoplastic hose
Barracuda G performance exhaust
Engine Cylinder Heatsink (Optional)
Adjustable CG
Adjustable weight distribution
Molded fuel tank with shake absorbing separators
Fully composite body accessories
Alloy hinge-pin holders
Improved front stiffener
Drive and shock shaft boot

OFF-ROAD COMPARISON CHART
Part (Order Code)	Competition	Pro	FT-R	Ultimate
	Short Chassis	Long Chassis (MAX)
Chassis	5083 Alloy - Short	7075 Alloy - CNC Machined - Anodized (400103A)	7075 Alloy - CNC Machined - Anodized (400103A)	7077 Alloy - CNC Machined - Anodized (400103A)
Barracuda G Performance Exaust Set (750601X)	OPT	STD	STD	STD
Clutch Bell Carrier	Composite	Alloy (415502A)	Alloy (415502A)	Alloy (415502A)
Engine Clutch House Alloy (415701A)	OPT	OPT	OPT	STD
DBB Ackerman Plate Standard 8mm (380203A)	OPT	STD	STD	STD
Front Diff.	Planetary F/R	Planetary F/R	LSD F/R (200101X)	LSD F/R (200103X)
Center Diff.	Planetary Center	Planetary Center	LSD Center (200201X)	LSD Center (200203X)
Rear Diff.	Planetary F/R	Planetary F/R	Planetary F/R	LSD F/R (200103X)
Diff. Case	Composite	Composite	Steel	Alloy (200402A)
Front Diff. House Inner	Composite	Composite	Composite	Alloy (415102A)
Rear Diff. House Inner	Composite	Composite	Alloy (415102A)	Alloy (415102A)
Center Diff.Holder Set	Composite	Composite	Alloy (415202A)	Alloy (415202A)
W5 MAX Front Wishbone Alloy (300104A)	OPT	OPT	STD (W5 Only)	STD (W5 Only)
Front Wishbone Alloy for 599 Wheelbase (300108A)	OPT	OPT	STD (RR5 Only)	STD (RR5 Only)
Front Hub L/R	Composite	Composite	Alloy (300603A)	Alloy (300603A)
Rear Hub L/R	Composite	Composite	Alloy (300604A)	Alloy (300604A)
L/R Caster Block	Composite(6°)	Composite(6°)	0° Alloy (300704A)	0°, ±4° Alloy (300705X)
Pro-Bite Racing Clutch (290101X)	OPT	OPT	OPT	STD
Turnbuckle Set	Steel	Steel	Steel	Alloy (301204X)
Shock Absorbers - Front	Composite	Alloy (320103X)	Alloy (320103X)	Alloy (320107X)
Shock Absorbers - Rear (RR5)	Composite	Alloy (320202X)	Alloy (320202X)	Alloy (320205X)
Shock Absorbers - Rear (W5)	Composite	Alloy (320103X)	Alloy (320103X)	Alloy (320107X)
Upper Shock Absorber Joint Cup	Composite	Composite	Composite	Alloy (320502A)
Lower Shock Absorber M5 Joint	Composite	Composite	Composite	Alloy (320503A)
M8 Upper Wishbone Rose Joint L/R Thread	Composite	Composite	Alloy (340102A)	Alloy (340102A)
Servo Saver Upper Arm	Composite	Composite	Composite	Alloy (380102A) & Composite
Steering Servo Turnbuckle	Steel	Steel	Steel	Alloy (381002A)
Brake Plate	Composite	Composite	Alloy (415302A)	Alloy (415302A)
Lay Shaft Carrier	Composite	Alloy (415402A)	Alloy (415402A)	Alloy (415402A)
Rear Upper Stiffener Alloy (446201A)	OPT*	OPT*	STD	STD
Front Stiffener	Composite	Composite	Composite	Alloy (445102A)
Rear Stiffener	Composite	Alloy (445202A)	Alloy (445202A)	Alloy (445202A)
Upper Stiffener Alloy	OPT**	OPT**	Alloy (446101A)	Alloy (446101A)
Diff.House-Stiffener Spacer	Composite	Composite	Alloy (460102A)	Alloy (460102A)
Carburetor / AirFilter Venturi	Composite	Composite	Alloy (725302A)	Alloy (725302A)
Engine Insulator Alloy G230-G290 (726002A)	OPT	OPT	OPT	STD
Radio/Servo Tray - Hydraulic Brake Compatible (930301X)	OPT	OPT	OPT	STD
EFRA Air Box Intake Silencer (725801X)	OPT	OPT	OPT	STD
Brake Disc	Spring Steel	Spring Steel	Light Weight ABS (260102S)	Light Weight ABS (260102S)
Front Wishbone Holder Set	Composite	Alloy (300203A)	Alloy (300203A)	Alloy (300203A)
Rear Wishbone Holder Set	Composite	Alloy (300303A)	Alloy (300303A)	Alloy (300303A)
Anti-Roll Bar Set F/R 3.5mm (360101X)	OPT	STD	STD	STD
XL CCD Axle (935601X)	OPT	OPT	OPT	STD
W5 Front Tower (430104A)	Alloy 5mm	Alloy 5mm	Alloy 5mm	Alloy 5mm
W5 Rear Tower (430204A)	Alloy 5mm	Alloy 5mm	Alloy 5mm	Alloy 5mm
RR5 Front Tower	Alloy 5mm	Alloy 8mm (430101A)	Alloy 8mm (430101A)	Alloy 8mm (430101A)
RR5 Rear Tower	Alloy 5mm	Alloy 8mm (430201A)	Alloy 8mm (430201A)	Alloy 8mm (430201A)

Length	: 800 mm
Width	: 475-480 mm
Overall height	: 325 mm
Ground clearance	: 25-85 mm
Weight	: 12.8-13kg (depending on equipment installed)
Wheelbase	: 610-620 mm (adjustable)
Trackwidth	: 410mm
Chassis material	: 7075 Anodize Alloy (4mm)
Suspension	: Non-parallel non-line independent
Caster angle	: 8°(6° - 14° adjustable)
Camber angle	: Adjustable
Toe angle	: In-board and out-board adjustable
Anti-squat	: 3°(adjustable)
Rear-squat	: 5°
Kick-up	: 8°-10°(adjustable)
Shock absorber	: Coil-over Oil-filled Internal High Pressure Cell
Transmission	: Full-Time 4WD 3-Diff Shaft Driven
Gear ratio	: 9.14:1 (18 available 7,44:1 to 10,67)
Tyre size	: 65 x 160 mm (Astro-Max)

Some parts (engine and radio gear) shown on the pictures are for photographing purposes only and not included in the car.
The Company reserves the right, at its discretion, to change and modify some properties of products such as colors of wheels, tire patterns, compound of tires without notification.
Required for operation (not included): Engine, 2 ch. Radio, steering servo and throttle/break servos
Cars come with a basic decal set, they may differ from the images on this page.

Γράψτε μια κριτική

Το Όνομα σας

Η κριτική σας

Σημείωση: η HTML δεν επεξεργάζεται!

Βαθμολογία Κακή Καλή

More

MCD RR5-MAX PRO Spec (not RTR) 1/5

MCD RR5-MAX PRO Spec (not RTR) 1/5

Γράψτε μια κριτική

Social