- CRAWLER
- Crawler - Αξεσουάρ
- DASH
- Lexan
- Καλώδια & Βύσματα
- ΠΡΟΣΦΟΡΕΣ
- Αυτοκίνητα
- Αεροπλάνα
- Ελικόπτερα
- Σκάφη - Πλοία
- Κινητήρες Nitro
- Καύσιμα
- Μπουζόπιπες - Μπουζιά
- Σέρβο
- Μίζες - Μιζόκουτα
- Θερμόμετρα
- Τηλεκατευθύνσεις
- Ανταλλακτικά
- Σιλικόνες - Λάδια - Καθαριστικά
- Drones - Multirotors
- Εργαλεία
- Speed Controls (ESC)
- Μπαταρίες
- Φορτιστές
- Ηλεκτρικά Μοτέρ
- Κόλλες - Χρώματα - Spray
- Μπλούζες - Καπέλα - Διαφημιστικά
- Εργαλειοθήκες - Βάσεις - Τσάντες Μοντέλων
- Αυτοκόλλητα
Το καλάθι είναι άδειο!
HPI - FLUX MLH-2200 BRUSHLESS MOTOR 1/8 (50mm WIRE)
The Flux MLH-2200 is the centerpiece of our latest 1/8th
scale brushless-powered vehicles. If you're looking for jaw-dropping and
awe-inspiring power for your 1/8th scale off-road vehicles, this is
where you can stop looking! The Flux MLH-2200 will give you more than
enough power for anything you're looking for: giant air stunts, multiple
back flips, colossal top speeds, and wheel-spinning sideways action!
Featuring
the sleekest heatsink design of any HPI 1/8th scale brushless motor
case, the Flux MLH-2200 has 11 heat-radiating ribs circling the
black-anodized case. These fins help dissipate the heat that the motor
will generate as it spins up to thousands of times per second to give
you the awesome stunt action you want to get out of your RC car or
truck.
With the ability to handle twin 3S LiPo batteries (that's
more than 22 volts of LiPo power!), the Flux MLH-2200 can deal with
anything you can ask of it! 6.5mm bullet connectors on 12-gauge motor
connector wires transmit maximum power from the speed controller for
instant wheelie or dirt-throwing action.
With a 5mm motor shaft, you can fit any of the available optional pinions for your Vorza, Savage Flux HP or Savage XL Flux.
The Flux MLH-2200 has a 4-pole rotor for high torque, fast acceleration response, and stable power output.
The machined aluminum housing, alloy steel output shaft, and high-precision bearings ensure high durability and smoothness.
Please note: The Flux MLH-2200 must be used with an ESC that can handle the immense power it requires, the #160353 Flux ELH-6S Waterproof ESC is the perfect match!
This version of the Flux MLH-2200 Motor featues 50mm Wires that are the perfect for the Savage X Flux V2!
Technical Specifications:
KV (No Load): 2200KV
LiPo: 2-6S
Resistance (Ω): 0.0058
No Load Current: 5A
Poles: 4
Connector: 6.5mm Bullet
Dimensions (mm): Φ=42 / L=74
Shaft (mm): Φ=5 / L=18.5
Weight: 418g
Application: 1/8th Buggy/Monster Truck
NOTE: Before
driving in wet conditions, make sure that other electronics fitted to
the vehicle are safe to use (marked as water-resistant or waterproof),
or that they are fully enclosed and protected from water and moisture
(such as in a sealed receiver/battery case). Fans mounted on speed
controllers are not water resistant - we recommend to disconnect the fan
from the ESC before driving in wet conditions and allow it to dry fully
before reconnecting the fan power. Lubricate exposed metal drivetrain
parts such as bearings, outdrives and diff shafts before driving in wet
conditions. Motors are not intended for submerged use and may be damaged
if used when under water. After driving in wet conditions, make sure to
rinse off dirt and any corrosive liquids like saltwater with plain
water and re-lubricate metal drivetrain parts.